The Logitech M317c Party Collection Mouse is a small wireless USB receiver mouse made for everyday pointing, clicking, and scrolling. It uses a plug-in receiver, not Bluetooth, so the first part of setup is making sure the receiver and the mouse still match each other.
Windows can usually run the basic left click, right click, pointer, and wheel functions without a separate driver package. The Logitech software matters when the receiver needs pairing again, when the original receiver has been replaced, or when Windows does not detect the receiver cleanly.
This model uses simple controls, so the download page should focus on receiver connection, battery checks, wheel behavior, and USB detection. Avoid gaming software unless your download section clearly marks it for another Logitech product, because this mouse does not need that type of package.
Logitech M317c Party Collection Mouse Windows Driver Download
| Driver Name | Description | Supported OS | File Size | Download |
|---|---|---|---|---|
| Logi Bolt App | Installs the Logi Bolt utility for supported Logitech receiver management and device connection setup. | Windows 11, Windows 10 32-bit/64-bit | 33.11 MB | |
| Logitech Unifying Software | Helps pair compatible Logitech wireless devices with a Unifying USB receiver. | Windows 11, Windows 10 32-bit/64-bit | 3.96 MB | |
| SetPoint 32-bit | Full offline SetPoint package for adjusting mouse buttons, tracking speed, hot-keys, and device-specific settings. | Windows 11, Windows 10 32-bit, Windows 8 32-bit, Windows 7 32-bit | 78.04 MB | |
| SetPoint 64-bit | Complete offline SetPoint installer with battery status, Caps Lock, Num Lock, and mouse control options. | Windows 11, Windows 10 64-bit, Windows 8 64-bit, Windows 7 64-bit | 80.45 MB | |
| SetPoint Smart Installer | Small SetPoint web installer for mouse button settings and tracking options; internet is required during installation. | Windows 11, Windows 10 32-bit/64-bit, Windows 8 32-bit/64-bit, Windows 7 32-bit/64-bit | 4.61 MB |
Logitech M317c Party Collection Mouse Mac OS Driver Download
| Driver Name | Description | Supported OS | File Size | Download |
|---|---|---|---|---|
| Logi Bolt App | Provides Logi Bolt device setup tools for supported Logitech hardware on compatible macOS systems. | macOS 12, macOS 11, macOS 10.15 | 54.96 MB |
Setting Up the M317c Receiver and Logitech Utility
Start with the small USB receiver that came with the mouse. Plug it directly into a computer USB port, switch the mouse on, and wait a few seconds. A basic pointer should appear without a long setup screen on most systems.
Use the receiver before changing software
A USB hub, monitor port, dock, or long extender can make a simple wireless mouse look faulty. Connect the receiver straight to the computer first. If the desktop case blocks the signal, try a front USB port or a short USB extension cable.
The M317c belongs to Logitech’s Unifying receiver family when the receiver and mouse carry the matching Unifying mark. Use the Logitech Unifying utility when you need to pair the device again or connect it with a replacement Unifying receiver.
Install only the matching Logitech package
For Windows, install the Logitech Unifying software when pairing fails or when the receiver detects but shows no active mouse. Follow the pairing screen carefully, turn the mouse off when the utility asks, then turn it back on to let the receiver find it again.
Do not stack several Logitech utilities unless you need them for other devices. Old Options, Options Plus, SetPoint, and Unifying entries can sometimes confuse the setup path. Remove the extra utility, restart Windows, then install only the package needed for this receiver.
Check battery and signal before blaming the download
A weak AA battery can create the same symptoms as a bad driver. Open the battery cover, check the direction marks, and use a fresh battery. If the battery light glows red or stays dark after switching the mouse on, treat the battery as the first suspect.
Keep metal objects, large speakers, external drives, and crowded wireless devices away from the receiver area. Also test the pointer on plain paper or a normal mouse pad. Optical tracking can fail on glass, mirror-like, or very dark glossy surfaces.
When the M317c Stops Pairing, Moving, Clicking, or Scrolling
Most M317c faults come from a receiver mismatch, weak battery contact, USB detection trouble, or signal loss near the computer. Work through the symptom that matches your case, because reinstalling software does not solve every failure.
Receiver appears, but the mouse does nothing
When the Unifying receiver appears in the pairing tool but the pointer never moves, the mouse may not be paired to that receiver. Open the Unifying utility, remove the inactive device if it appears, and run the pairing process again with the mouse switched off and on at the prompt.
Also confirm that the receiver is a genuine matching Logitech Unifying receiver. A random 2.4 GHz dongle will not pair with the M317c. If the original receiver broke, replace it with the right receiver type, then pair it through the Logitech utility.
Windows does not detect the USB receiver
Try another USB port before changing drivers. If Windows still does not react, open Device Manager and look under USB controllers or Human Interface Devices. Remove the problem USB Composite Device entry, unplug the receiver, restart the computer, and plug the receiver back in.
This lets Windows rebuild the basic USB mouse connection. Use a direct USB port during this test. Some hubs keep a failed device state active, so they can bring the same detection problem back immediately.
The pointer jumps, pauses, or lags
Lag often comes from distance or blocked signal rather than software. Move the receiver closer to the mouse, especially on a desktop tower where the rear USB port sits behind metal. A front port usually gives the small receiver a clearer path.
Wireless interference can also create short pauses. Keep the receiver away from external hard drives, USB 3 cables, routers, and crowded power strips. If the pointer improves after moving the receiver, leave the hardware layout changed instead of reinstalling the package again.
The mouse wakes slowly after sitting unused
Wireless mice save battery when idle, so a short wake delay can happen. However, a long delay usually points to weak battery power or USB power saving. Replace the AA battery first, then test the mouse again after a few minutes of idle time.
On Windows laptops, also check USB power management for the receiver’s USB path. Turn off the option that lets Windows power down that device to save energy. This change can stop repeated reconnect delays after sleep.
The battery light stays red or does not turn on
Open the cover and check the battery direction. A fresh AA battery must touch both contacts firmly. If the compartment has dust or light corrosion, wipe the contacts gently with a dry cloth before inserting the battery again.
Switch the mouse off for a few seconds, then switch it on. If the light still stays dark with a known good battery, test the receiver and mouse on another computer. That quick test separates a computer-side USB issue from a possible hardware fault.
The wheel scrolls poorly or skips lines
A dirty wheel area can make scrolling feel uneven. Turn the mouse off, remove the battery, and clear loose dust around the wheel with gentle air or a soft brush. Do not push liquid cleaner into the wheel gap.
Test scrolling in a simple browser page or document before changing system settings. If scrolling works there but fails in one program, adjust that program’s scrolling option or reset its mouse shortcuts. The M317c uses line-by-line scrolling, so do not expect hyper-fast wheel behavior.
Middle click works in one app but not another
The wheel also acts as the middle button. Press it straight down without rolling the wheel forward. A browser tab test works well: middle-click a link and check whether the browser opens it in a new tab.
If the middle click fails everywhere, reconnect the receiver and restart the Logitech utility if you installed one. If it fails only in one app, the program may have assigned middle click to another action or disabled it inside its own settings.
Left click double-clicks too quickly
Before assuming the switch has failed, check the double-click speed setting in the operating system. A very fast setting can make normal clicks feel wrong. Slow it down slightly, apply the change, and test with folder selection or a simple text field.
Dust near the button edge can also create odd clicks. Turn the mouse off and clean around the left and right buttons with a dry brush. If the same click fault follows the mouse to another computer, the button hardware may have worn out.
The cursor does not track on a desk or glossy surface
Optical tracking needs a surface with enough visual texture. Glass, shiny plastic, reflective tables, and some patterned fabric can confuse the sensor. Place a plain mouse pad or a sheet of matte paper under the mouse and test slow pointer movement.
Also check the sensor opening underneath. Hair or dust near the optical window can break tracking even when clicks still work. Remove the battery first, then clear the area gently without scratching the sensor window.
The mouse stops after changing the receiver
The M317c will not work with any random Logitech receiver just because it fits the USB port. Use a receiver type that matches the mouse, then pair it through the Unifying utility. A receiver already paired with other devices can still add the mouse if it has an open slot.
If pairing fails, remove old pairings from the utility and try again with only one receiver plugged in. Keep the mouse close to the receiver during pairing. Once it works, test movement, left click, right click, wheel scroll, and middle click before closing the setup window.